Fuel oil  is obtained by oil refining. Fuel oil is manufactured using the process of visbreaking tar and by compounding with residual products of various refining processes. During the distillation of the latter, various light volatile substances (kerosene, gas oil, gasoline) are actively released.

It is used as fuel for carburetor and injector engines, for the production of paraffin, for cleaning fabrics (dissolves fats), as a combustible material, as a solvent. The better the gasoline evaporates, the more complete the flammable mixture is formed, and as a result, the engine starts easier, the condensation of the fuel vapor is reduced in the cylinders.

Fuel for jet engines of RT brand is extracted by hydrotreating straight-run kerosene fractions with a boiling range of 135-280 ° C. It has quite ideal chemical and thermo-oxidative stability, sulfur content is low and almost complete absence of mercaptans. Jet fuel is used as a fuel for subsonic aircraft.

Diesel technology fraction (DTF) is manufactured on high-tech equipment by distillation of diesel fractions. The sulfur content of the mixture of hydro treated fractions is 1.1% in average by weight, aromatic hydrocarbons is 26% by weight.

LN is a colorless liquid with a specific odor. The composition of gas condensate is similar to petroleum, the substance contains kerosene and gasoline fractions, while there are no asphaltenes and resinous substances.

Fuel is intended for use in marine high- and medium-speed diesel engines as well as gas turbine plants. It is made from diesel fractions with the addition of light gas oils of secondary processes. Unlike diesel, it has a lower cetane number and a higher sulfur content.

Technical kerosene KT-1. Kerosene is a liquid fuel substance, mixture of carbons, which boil off at temperature of 140 ° C to 220 ° C. Kerosene is extracted by special processing and purification of oil with the help of reagents. Technical kerosene is also used as a solvent for washing various parts and mechanisms.

Diesel fuel is a liquid viscous and hard-to-resist liquid which contains almost carbon. One of the main indicators of diesel fuel is the cetane number. Cetane number is a parameter that affects the duration of engine warming up and starting. When operating the engine in conditions of low ambient air temperature, it is best to use diesel fuel with a higher cetane number.

LN is a colorless liquid with a specific odor. The composition of gas condensate is similar to petroleum, the substance contains kerosene and gasoline fractions, while there are no asphaltenes and resinous substances.

Bitumen is an indispensable component of construction. Bitumen is not dissolved in water, it is highly soluble in benzene, gasoline, acetone and other organic solvents. It is widely used in the construction industry since its cost is very low.

Sulfur is a crystalline solid of yellow color. Sulfur is insoluble in water but it is highly soluble in anhydrous ammonia and in some organic solvents such as alcohol, benzene etc. A large amount of sulfur in industry is produced from native sulfur.

Amount of butanes and butylene, not more than 60%; mass fraction of hydrogen sulphide and mercaptans sulfur, % not more than 0.013%; volume fraction of liquid residue at 20 ° C, % not more than 1.6%.

Amount of butanes and butylene, not more than 60%; mass fraction of hydrogen sulphide and mercaptans sulfur, % not more than 0.013%; volume fraction of liquid residue at 20 ° C, % not more than 1.6%.